Basic Info.
Model NO.
VIGA gas atomizer
HS Code
85142000
Production Capacity
20 Sets/Year
Product Description
Metal Powder Atomizing Equipment
VIGA Gas Atomization Equipment
Working principle: Metal or alloy materials are melted under inert gas protection or vacuum condition, and the molten metal is poured through insulation tundish system into a gas nozzle where the melt stream is disintegrated into droplets by high pressure inert gas stream. The small droplets will be solidified into tiny spherical powders in flight in the atomization tower.
The equipment is composed of vacuum smelting system, atomization system, gas supply system, powder collecting system, cooling water system, system integrated control system,atomizing tower support, steel structure platform and so on.
System for selection:
1.Atomizing gas heating device
2.CCD video surveillance system (to observe equipment operation status in time)
3.On-line laser particle size monitoring system
4.Online oxygen content monitoring system
5.Pressure difference controlling system
6.Fluid limiting diversion tube heating system
7.Pneumatic powder classification system
8.Multistage high vacuum melting system (max. vacuum degree: 6.7x10-3Pa)
9.Melting and Atomizing temperatures monitoring system
Vacuum induction melting and inert gas atomization is the leading process for production of a variety of high-performance metal powders and essential for quality manufacturing of Ni-based super-alloys as well as Fe-, Co-, Cr-based and other special alloy powders. In the VIGA system, a vacuum induction melting unit is integrated with an inert gas atomization unit. The starting materials are melted using electromagnetic induction which couples electrical power into the crucible/material under vacuum or in an inert gas atmosphere. Once the desired melt homogeneity and chemical composition have been achieved, the material is poured into a tundish by crucible tilting. The fine metal stream flowing from the tundish orifice into the atomization nozzle system is subject to a high-pressure, inert-gas jet and then atomized. The combination of molten metal and gas jet creates a spray of micro-droplets that solidifies in the atomization tower and forms fine powder with spherical shape.
Powder Characteristics
Powders produced with SKYLINE's VIGA systems typically have the following characteristics:
- Spherical shape
- Good rheological flow characteristics
- Particle size ranging from 30 µm ≤ d50 ≤ 90 µm
- High purity
- High flow ability
- Low O, N, and H concentrations
- Rapidly solidified and homogeneous microstructure
VIGA systems are the most versatile method for processing a variety of metallic elements and alloys into metal powders. Powders produced by the VIGA process are used in numerous applications highlighted below:
Materials
- Ni-base super-alloys
- Fe-, Co-, Cr-base alloys
- High alloy steels
- High purity Cu-, Al- and Mg-alloys
- MCrAlY alloys
- Precious metals and their alloys
- Solder and brazing metals
- Wear and oxidation protection coatings
- Ultrapure reactive copper and aluminum alloys
- Sputtering targets
- Feedstock for additive manufacturing technologies (e.g. 3-D printing)
- Feedstock for MIM and HIP
- Aviation industry
- Power engineering
- Electronics and chemical industry
- Bio-medical engineering
- Precious metal industry
- Research and development