API600 Cast Steel/Stainless Steel WCB/CF8/CF8M Rising Stem 150LB/300LB/600LB/900LB Industry Valve Weld/Flange Gate Valve

Gate Valve has rising stem and non-rising stem types with solid wedge and flexible wedge for different mediums. 
Rising stem gate valves are used when shut off is required and a quick visual indicator of open/closed position is needed. The stem of rising stem gate valve drives the gate to lift and lower together, and the transmission thread on the valve stem is outside the valve body. Therefore, the position of the gate can be intuitively judged according to the moving direction and position of valve stem, and the transmission thread is lubricated and protected from fluids, but it requires a large installation space.The Wedge of gate valve include Solid taper wedege,flexible wedge,slpid wedge,parallel disk.The body bonnet joint type include Screwed Bonnet,Bolted Bonnet,Welded Bonnet,Pressure-Seal Bonnet.The gate valve end connection include flange end(RF,FF,RTJ),Butt-weld end and socket weld end.

Features:

1. Full port
2. Outside screw and yoke
3. Bolted bonnet
4. Flexible wedge, fully guided integrated seats
5. Rising stem and non-rising hand-wheel
6. Tongue and groove between body and bonnet
7. Pneumatic and electric actuator available

Specifications:
 

Applicable Standards:
 

1. Manufacture standar as per  API 600
2. Design standard as per ANSI B16.34
3. Face to face standard as per ANSI B16.10
4. End flanges standard as per ANSI B16.5
5. Butt weld ends standard as per ANSI B16.25
6. Inspection and test standard as per API 598

Gate Valve Drawing: 





Material List:
 
Material List:
    
PRODUCTS SHOW:





FAQ
Q1: We are interested in your products?
A1: In order to recommend you suitable products, please provide detail information, like size, material, pressure, model.
Q2: Is the requirement for MOQ?
A2: For some small size, like 1/4''-1''(DN6-DN25), it request the MOQ is 50pcs for each size. Generally speaking, it depends on your order.
Q3: How about the warranty?
A3: The warranty time is 18 months after leaving our factory. We can repair or change because of the quality problems.
Q4: Payment
A4: Mainly T/T, Western Union & PayPal are applicable for us. Payment Term: 30% prepayment, 70% balance paid before shipping or against copy of BL.
Q5: Can you manufacture different standards valves according to customer requirements?
A5: Yes. We can manufacture API,DIN,GOST,JIS standards for different pressure & temperature & size according to different needs.
If you want to know more about our products, please contact freely. We will patiently answer your all questions.
 

Other Products We Manufacture

1. Industry Valves
Ball Valve
3 Way Ball Valve
1 PC Male/Female Thread Ball Valve
2 PC Male/Female Thread Ball Valve
3 PC Male/Female Thread Ball Valve
1 PC Flange/Welding/Union Ball Valve
2 PC Flange/Welding/Union Ball Valve
3 PC Flange/Welding/Union Ball Valve
Globe Valve
Male/Female Thread Globe Valve
Flange Globe Valve
Gate Valve
Male/Female Thread Gate Valve
Flange Gate Valve
Check Valve
Wafer Check Valve
Spring Check Valve
Dual Disc/Plat Wafer Check Valve
Swing Check Valve
Flange Check Valve
Butterfly Valve
Angle Seat Valve
Pneumatic Ball Valve
Pneumatic Angle Seat Valve
Electric Ball Valve
Electric Angle Seat Valve
Y Strainer/Filter