Basic Info.
Input Power
5000W
Kerosene Pressure/Flow
1.2MPa
Oxygen Pressure/Flow
1.6MPa
Transport Package
Wood
Specification
powder feeder, spray gun and control cabinet
Trademark
Lijia
Origin
Zhengzhou, China
HS Code
8424899990
Production Capacity
100/Year
Product Description
Component | Characteristic | Parameter |
HV-8000 Control cabinet | 1,Imported core accessories and mass flow-meter, full closed loop system, high-performance PLC control 2,Rugged design, Europe and the United States imported valves, pressure switches, flow switches, sensors,the quality is like Europe and the United States equipment. 3,Touch screen operation, intelligent automatic operation;4,Process parameters on the touch screen panel at a glance; 5,One key operation, can realize the spraying process automation and real-time detection, 7 alarm prompt, can respond to the system fault immediately. | 1,Program control: full closed-loop PLC control 2.Interface control: 12-inch touch screen 3.Flow control: mass flow controller 4. Input power: 5000W 5. Kerosene pressure: 1.2Mpa 6. Kerosene flow: 0~60L/h 7. Oxygen pressure: 1.6mpa 8. Oxygen flow: 0~60m3/h 9. Carrier gas pressure: 0.1~0.3Mpa 10. Carrier gas flow: 3~30L/min 11. Main parts origin: Germany, America, Japan, Italy |
Component | Characteristic | Parameter |
D-3000 Powder feeder |
|
3. Powder drying function: built-in heater 4. Powder cylinder mode: single cylinder type 5, self-cleaning function: yes 6,Volume of powder storing barrel:3.5L 7,Feeding gas: Nitrogen,argon 8,Pressure of feeding gas: 0.15-0.3Mpa 9,The carrier gas flow rate:0~15L/min 10Feeding speed:0~220g/min 11Feeding precision:±1% 12,Powder size :5~150μm |
Characteristics and advantages of HV-80-JP supersonic flame spraying system
1, Solid cabinet design, fuel flow control area, pressure display area, electronic control area are modular layout, panel clear and easy to operate.2. All imported valves, pressure switches, flow switches and sensors from Europe and America are of the same quality as those from Europe and America
3, The use of Japanese mitsubishi high-performance PLC control, after ignition automatically maintain oxygen and fuel, carrier gas flow output.
4. All the internal fuel, oxygen, carrier gas and cooling water connected on the equipment have the detection function to ensure that all preparation processes can be fully tested before ignition.
5. Monitor the running status of the equipment in real time. Once any part is found to be operating beyond the safe range, the whole system will stop sharply, send an alarm and provide fault information.
6. The equipment starts and stops automatically under the control of PLC, which reduces the possibility of operator's misoperation.
7. Communication interface is set up inside the equipment to control the operation of peripheral devices.
8. Signal shielding measures are adopted to protect peripheral devices from electromagnetic interference during high frequency arc ignition.
At present, there are three main types of hydraulic rods, underground coal mine for hydraulic column, construction machinery of the hydraulic rod, the river environment of the hoist hydraulic rod. These three are basically using the traditional chrome plating technology to protect the surface, in which the coal mine and river environment of the hydraulic rod facing the problem of protection and wear resistance, construction machinery of the hydraulic rod is mainly faced with the problem of wear resistance.
Hydraulic support is one of the indispensable equipment for comprehensive mechanized coal mining. Because of the bad underground environment, the surface of the column often fails because of corrosion and collision. With the requirements of national environmental protection, the traditional chrome plating process is being eliminated, the column surface treatment technology is a major problem facing the column manufacturers and maintenance enterprises. The supersonic flame spraying technology used in the manufacture and remanufacture of hydraulic support column is the best technology to replace the traditional chromium plating.
Hydraulic support on construction machinery is generally used in atmospheric environment, after frequent use, the surface of the chrome coating can not meet the wear-resistant performance, using supersonic coating tungsten carbide than chrome coating life of 5-10 times.
Hydraulic hoist in river environment, contact with water, facing rust prevention, corrosion prevention, as well as sand erosion wear and other problems, also need to use thermal spraying process to better protect the hydraulic rod.
Hydraulic support is one of the indispensable equipment for comprehensive mechanized coal mining. Because of the bad underground environment, the surface of the column often fails because of corrosion and collision. With the requirements of national environmental protection, the traditional chrome plating process is being eliminated, the column surface treatment technology is a major problem facing the column manufacturers and maintenance enterprises. The supersonic flame spraying technology used in the manufacture and remanufacture of hydraulic support column is the best technology to replace the traditional chromium plating.
Hydraulic support on construction machinery is generally used in atmospheric environment, after frequent use, the surface of the chrome coating can not meet the wear-resistant performance, using supersonic coating tungsten carbide than chrome coating life of 5-10 times.
Hydraulic hoist in river environment, contact with water, facing rust prevention, corrosion prevention, as well as sand erosion wear and other problems, also need to use thermal spraying process to better protect the hydraulic rod.